-
Fire Retardant Sew-On Fastener Tape is a premium fastener suitable for aerospace, automotive, and industrial applications. This product is 100% polyamide and exhibits high peel and cut resistance along with excellent cycle life. This closure has a flame retardant (FR) coating that meets many industry fire retardant specification requirements, including FAR 25.853. Also available with flame retardant adhesive. -
Heat resistant. It is a highly technical product that uses alternative filament yarns to Nomex. This fastener is recommended for high temperature and fire resistance applications. Only available in Natural color. Various widths and lengths are available upon request -
Adhesive closures are coated with a heavy weight, aggressive hot melt rubber adhesive ideal for interior use on smooth surfaces and most general purpose applications. High Strength Instant Bond. With high temperature resistance and excellent peel and shear resistance, these fasteners utilize premium yarn and are suitable for up to 5,000 open/close cycles. -
It is a high performance fastener suitable for a wide variety of applications. This product is 100% polyamide and exhibits high peel and cut strength and good resistance to ultraviolet light. Certified according to STANDARD 100 by OEKO-TEX®, REACH and RoHS certified, it has opening/closing cycles of up to 10,000 times.
-
PVC packaging tape with natural rubber adhesive. Great adhesion and resistance. -
Kraft paper adhesive tape with natural rubber adhesive. Withstands extreme temperatures -
Kraft paper tape with natural rubber adhesive, reinforced with crossed filaments. Great resistance and adhesion -
Butyl tape, normally supplied in extruded strip form, protected by a white silicone paper liner. Product composition preformed butyl in strip. -
Double-sided adhesive pieces for interior decoration. measurement: 48mmx18mm -
1mm thick double-sided polyethylene foam discs. Diameter: 42mm -
American tape discs of 0.16mm thickness. Diameter: 30mm. hot melt adhesive -
Transparent double-sided polyester tape with skin-friendly hypoallergenic adhesive (synthetic rubber/acrylic) -
Crepe paper tape discs for painting masking. Max temp: 149°C -
Single sided polyethylene tape with medical grade adhesive. -
40my thick aluminum adhesive tape discs. -
Non-woven polyester tape with acrylic adhesive. Breathable Sterilization method: Gamma, EO -
Tape composed of a polyester film (PET) covered on the inside by a pressure-sensitive silicone adhesive that is resistant to high temperatures (over 200°C). -
Single sided foam tapes with medical grade adhesive. -
Polyester tape composed of a polyester film (PET) covered on the inside by a pressure-sensitive silicone adhesive that is resistant to high temperatures (over 200°C).
-
PP packaging tape with acrylic or hotmelt adhesive. Also available without noise. Available in colors. -
It is a double sided polyester tape with a PET support and a modified acrylic adhesive. For joints in materials including materials with low surface energy (PP, PE, EPDM...) Resistant up to 150 C -
Teflon tape discs with silicone adhesive -
PET discs with silicone adhesive. For masking in high temperature applications. -
Kapton discs with silicone adhesive. For masking in high temperature applications. -
It is a cold-adhesive sealing band made up of a butyl rubber film protected with a non-woven polypropylene fabric, transversally deformable. -
Sealant butyl tape composed of a combination of 55 µm thick ALU/PET (25 µm ALU / 23 µm PET) on top, a modified butyl elastomer rubber adhesive and covered by a PP liner. Universal use in permanent waterproofing, repairs and sealing. Seals and joints of materials such as glass, steel, concrete, stone, wood, aluminum. Thicknesses: 0.6mm-0.8mm -
Butyl tape for sealing in wet areas, joints between walls and floors and around drains. Seal around bathtubs, sinks and countertops to prevent water ingress -
Polyamide/Kapton tape with silicone adhesive (25 micron base) -
Teflon tape with high temperature adhesive. Class H -
Double-sided transfer tapes with heat-activable adhesive. Used to glue various materials: PE, PP, EPDM, metal, wood, textiles, plastics, paper, ceramics, etc. when high mechanical resistance and/or high temperature resistance (over 200ºC) are required. Great resistance to chemical agents. -
Single-sided heat-activated glass fabric tape for splicing technical fabrics, fiberglass, etc. -
Complete range of heat-activated films for the insertion of micromodules in plastic cards in the Smart-Cards industry: telecommunications, banking, transport, identification, healthcare, etc. -
Crepe tape for high temperature masking. Continuous:180°C; Short term: 200°C . Thickness :0.15mm. -
Aluminum tape with adhesive resistant to very high temperatures (200°C) -
Our aluminium foil thermal spray is meticulously engineered with highly adaptable backings, specifically designed to enhance abrasion resistance and facilitate seamless removal, leaving immaculate edges. Featuring advanced formulations, our Thermal Spray Tapes boast a high-temperature adhesive, ensuring robust adhesion throughout the application process while facilitating effortless adhesive removal, thereby minimizing the need for post-spray rework. It performs as a plasma or flame spray masking tape, allowing areas to be free of grit blasting and the plasma spray coating. Its high-temperature resistance makes it ideal for heat and reflectant tapes, and it is used in aerospace and automotive markets as a wire harness bundling tape in engine components. It is designed for extremely high demand thermal spray applications, such as HVOF and High Detonation Systems. It provides excellent abrasion and temperature resistance and conforms very well to a wide variety of surface configurations. The extremely aggressive adhesive system assures the tape stays in place throughout the entire coating process and will release cleanly after use, reducing the cleaning of the coated parts. Explore our extensive product lineup, including Silicone Rubber Coated Glass Cloth, Multi-layer, Aluminium foil laminated to glass cloth and Glass Cloth variants, -
Blue LDPE film with acrylic adhesive for temporary protection of lacquered metal, aluminum, steel, PVC, sandwich panel surfaces, etc. -
Film for surface protection. LDPE film for outdoor masking for 30 days. -
Polyester tape covered by a pressure sensitive silicone adhesive resistant to high temperatures (over 200°C). -
Glass cloth electrical tape with a thermosetting silicone adhesive with a total thickness of 0.17 mm .UL 510. Flame retardant in thickness and recommended for protection and insulation of windings -
High resistance glass cloth tape. acrylic adhesive. Class F. UL510. Flame retardant. Thickness: 0.18mm Insulating wraps for external protection for coils, dry-type transformers, etc. -
Transfer tape for adhesive surfaces such as fabrics, foams, felts or films. Resists high temperatures. -
Double-sided transparent acrylic foam tape. Thickness: 0.25mm. Withstands up to 250°C in short periods. -
Gray acrylic double-sided tape. Thicknesses: 0.64mm /1.14mm. Very resistant to UV and aging. +150°C continuously. 210°C for 1 hour. -
For applications requiring a combination of good heat transfer, dielectric strength, good adhesion and formability -
High power thermoconductive acrylic adhesive, 5.5N/cm *Working temperature range between -20°C and 155°C. -
Double-sided aluminum heat-conductive tape. Facilitates the diffusion of heat between surfaces. Working temperature range between -20°C and 155°C High power adhesive, 5'5N/cm -
Thermally conductive and flame retardant acrylic adhesive, 3N/cm. Working temperature range between -40°C and 180°C
-
High temperature resistant double sided tape. leaves no residue -
Low density polyethylene film for the protection of indoor surfaces. -
Low density polyethylene adhesive film for temporary surface protection. White on the outside and black on the inside. -
Adhesive film for carpet protection. Transparent and green colors. Different widths available. -
PET tape with rubber adhesive. 170°C-190°C for 20mins. Thickness: 51my.Green Masking of circuit boards during solder stripping and gold plating. -
Double-sided polyamide/kapton tape. Silicone adhesive
-
Copper tape with conductive electrical adhesive. For EMI/RFI shielding. Also available with adhesive Non-conductive
Do you need a quote for adhesive tapes?
At julmarsa we are at your entire disposal
to resolve your doubts and give you a quote.
WHO WE ARE
We are a company with more than 30 years of experience in the technical adhesive tape sector, being present in almost all industrial sectors. Our activity is to provide adhesive solutions to all our customers.
CONTACT
Calle Marqués de Mondéjar 16 – 1º B – C. Postal. 28028 – Madrid